Multifunctional monitor & logger powerlog 6s – ProgressiveRC 6S PowerLog User Manual
Page 10
-10-
Multifunctional Monitor & Logger PowerLog 6S
3) Temperature Monitor
T0 is constant internal temperature. T1 to T3 are external
temperature.
Temp. range
T0: -20℃– +70℃ (-4℉–+158 ℉)
T1-T3: -55℃– +125℃ (-67 ℉–+257℉)
Reset peak value
Press <▼>+ for 3 seconds, the peak value will be
replaced to be the current value.
Press <▲>+<▼> for 3 seconds and enter the screen
below: (Line 2, 3, 4 in the interface correspond to T1, T2,
T3 respectively.)
Press <▲>/<▼> to choose the needed item, and then
press <▲> for 3 seconds to cancel the sensor, which
becomes
when press < >, it displays‖‖ on the right side of the
item. Press <▲>/<▼> to alter the sequence and press
< > to save it.
Temperature sensor adopts DS18B20 (Programmable Resolution 1-Wire Digital Thermometer), and the
details can refer t
The connections to PowerLog as the picture：
Every DS18B20 has a unique ID number. Under the temperature monitor mode, when a
new sensor connects to it, the system will check the ID number of the new sensor
automatically, as picture:
Alternatively display ‖Find new DS18B20‖/‖S/N:xxxxxxxxxxxx‖ in the first line, while from the second line to
the fourth line it displays the ID number of the present T1—T3 sensors. Press <▲>/<▼> to choose the
needed Tx, while press < > and a new temperature sensor will be added in the menu. Press < > for 3
seconds to cancel the addition. If there are other new sensors in this circuit, the process will continue. The
temperature of the added temperature sensor will be displayed in the Temperature Monitor Interface.
1
S
+
-
J1
2
3
J2
3
2
1
1
2
3
1
3
2
T1
T2
T3
S/N:000002983990
00000297e2D6
00000297d187
T0
28.7
C
28.5 28.9
T1
27.1
C
25.8 30.7
T2
27.1
C
27.1 32.5
T3
NULL
C
NULL NULL
Current Value
Int. Temperature
Ext1 Temperature
Ext2 Temperature
Ext3 Temperature
Min. Value
Max. Value
Temp. Unit
TEMP SENSOR LIST
00000297e2D6
00000297d187
<▢>+<▼>
>3 Seconds
>3 Seconds