Mercedes-Benz M-Class 2006 Owners Manual - Manual (Page 172)

171
Controls in detail
Control system
Vehicle submenu
Access the Vehicle submenu via the
Settings... menu. Use the Vehicle sub-
menu to make general vehicle settings.
The following functions are available:
Adjusting compass zone
This function is not available if your vehicle
is equipped with the Modular COMAND
System and navigation module*.
Use this function to set the compass zone.
To set the compass zone:
̈ Move the selection marker to the
Vehicle submenu using the æ
or ç button.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Compass Adjustment Zone .
The selection marker is on the current
setting.
̈ Press button æ or ç to set the
respective compass zone.
For information on how to select the prop-
er geographic zone, see “Compass”
(
୴ page 295).
Calibrating compass
This function is not available if your vehicle
is equipped with the Modular COMAND
System and navigation module*.
Use this function to calibrate the compass
zone.
To calibrate the compass:
̈ Move the selection marker to the
Vehicle submenu using the æ
or ç button.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Compass Calibration .
The selection marker is on the current
setting.
Function Page
Adjusting compass zone 171
Calibrating compass 171
Display when ignition is
switched off 172
Set automatic locking 172
Limiting opening height of tail-
gate* 173
୴୴