Mercedes-Benz M-Class 2006 Owners Manual - Manual (Page 137)

136
Controls in detail
Memory function*
The memory button and stored position
buttons are located on the entry side of
each front seat base.
M Memory button
1, 2, 3 Stored positions
̈ Switch on the ignition ( ୴ page 34).
or
̈ Open the respective door.
Storing positions in memory
̈ Adjust the seats, steering wheel and
exterior rear view mirrors to the de-
sired position (
୴ page 38).
̈ Press memory button M.
̈ Release memory button M and press
stored position 1, 2 or 3 within
three seconds.
All the settings are stored at the select-
ed position.
Recalling positions from memory
̈ Press and hold memory position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
!
Do not operate the power seats using
the memory button if the seat backrest
is in an excessively reclined position.
Doing so could cause damage to front
or rear seats.
First move seat backrest to an upright
position.
i
Releasing the button immediately
stops movement to the stored posi-
tions.