Mercedes-Benz M-Class 2006 Owners Manual - Manual (Page 157)

156
Controls in detail
Control system
Standard display menu
In basic mode, the multifunction display
shows the trip odometer and the main
odometer. This is known as the standard
display.
1 Trip odometer
2 Main odometer
In case you see another display, press
button
è or ÿ repeatedly until the
standard display appears.
̈ Press button k or j to select
the functions in the standard display
menu.
The following functions are available:
Call up digital speedometer
̈ Press button k or j until the
digital speedometer or the outside
temperature appears in the multifunc-
tion display.
To select whether the digital speedometer
or the outside temperature is shown in the
multifunction display, see “Selecting dis-
play (speed display or outside tempera-
ture) for status display” (
୴ page 165).
Call up coolant temperature display
̈ Press button k or j repeatedly
until the coolant temperature appears
in the multifunction display.
Function Page
Check engine oil level (ML 500) 328
Call up maintenance service
indicator 371
Call up digital speedometer 156
Call up coolant temperature
display 156
Check tire inflation pressure 347
i
During severe operating conditions,
e.g. stop-and-go traffic, the coolant
temperature may rise close to 248°F
(120°C).
!
The engine should not be operated with
the coolant temperature above 248°F
(120°C). Doing so may cause serious
engine damage which is not covered by
the Mercedes-Benz Limited Warranty.