Mercedes-Benz CLK-Class 2008 COMAND Manual - Manual (Page 67)

67
Audio
CD operation
With the number keypad
̈ Activate the CD main menu
(
୴ page 64).
̈ Press *.
An input line will appear in the CD main
menu.
1 Number of tracks on CD corresponds
with the valid number range
2 Input line
E.g.: Track 14.
̈ Press 1 and 4 in short succession.
̈ After entering the track number, wait
approximately 3 seconds.
The selected track is played. The CD
main menu is displayed.
CD track scan
The tracks on a CD can be scanned one
after the other for 8 seconds each. The
function will switch off automatically when
the starting track is reached. You can also
manually stop the scan function.
Activating
̈ Press the Scan soft key.
Scan will begin.
i
Entries higher than the number of
tracks available on the CD are not
possible.
During MP3 CD playback
ț CD drive
You can select the tracks of the
current folder (
୴ page 78).
ț CD changer*:
You can select the first 99 tracks of
a MP3 CD.
i
When you start the scan function, the
playback mode
Normal sequence
( ୴ page 69) is automatically activated.