Mercedes-Benz CLK-Class 2008 COMAND Manual - Manual (Page 212)

212
System
System settings
Voice control individualization
The individualization function is used to
adapt the voice control to your own voice
and to therefore improve speech
recognition. This does not affect speech
recognition of other users.
Individualization consists of two stages.
The first stage involves training digits,
while the second stage trains specific
commands.
̈ Open the System menu ( ୴ page 208).
̈ Press the VC Tips soft key.
The Voice control menu will appear.
̈ Push the joystick to G to select the
Individualization menu item.
̈ Press E.
The Individualization menu will appear.
Starting individualization
̈ Push the joystick to g to select menu
item Start new
individualization .
̈ Press E.
The individualization process starts.
The system now guides you through
the individualization process using a
dialog, all operations are voice inputs.
After completion of the first stage, the
system prompts you to save the data of the
first stage.
If you do not save the first stage:
ț Individualization is cancelled,
ț Data from an existing first stage
remains unchanged.
If you save the first stage:
ț Data from an existing first stage is
over-written but is not saved until the
second stage is started.
If you do not start the second stage:
ț Data from the first stage remains
unchanged,
ț The individualization process is
finished.
i
You can only activate the individualiza-
tion function when the car is station-
ary. If the car is moving, the following
message will appear:
Individualization only
possible when car is
stationary
.