Kontron KISS 1U Short KTQM77 Users Guide - Manual (Page 16)

7. Product Description KISS 1U Short – User’s Guide (V1.10)
7.1.1. Interfaces on the Front Side
7.1.1.1.
USB Interfaces
KISS 1U Short is equipped with four USB interfaces at the front side. These connectors allow you to connect different USB
devices to the KISS 1U Short platform.
When USB devices are connected to the USB ports on the front of the device, the front access panel
cannot be closed and locked.
7.1.2. Controls and LED Indicators
1
3
3 HDD LED
2 Power LED
1 Power button
2
Fig. 9: Power button and LED indicators
Power Button Press this button to turn the system on or off. Please observe the setting options for the power
button in the BIOS-Setup.
Power LED
(green) Lights up green if the system switched on by pressing the “Power button”.
Prerequisite:
The system must be attached by means of the power cord to an appropriate mains (AC).
HDD Activity
LED (orange) Indicates hard disk activity.
Do not press the eject button, while the drive LED is lit or flashing.
7.1.3. Filter Mat Holder
The filter mat holders (Fig. 8, pos. 7) are located behind the air grilles of the front access door inserted into the air filter
holder. The filter mat protects your system against dust and dirt. It can be changed while the system is powered up (refer
to the section 10.3 "Cleaning the Filter Mat").
7.1.4. External Accessible Drive Bays
Depending on the configuration ordered, your KISS 1U Short can be equipped with up to two externally accessible drives:
D1 (1x 5.25" Slim-line drive bay) and D2 (1x 3.5" drive bay) (refer to Fig. 8, pos. 2 and pos. 3).
14 www.kontron.com