Kontron ETX-LX - Manual (Page 44)

11 Appendix C: BIOS Operation
Kontron User's Guide ETX®-LX 44
11.9 Power Management Setup
Feature Option Description
ACPI Function Enabled
This item shows you the current state of the Advanced Configuration and
Power Management (ACPI). To change the state please go to the Menu
Power Management.
Power Management
Disabled
Legacy
APM
ACPI
This item allows you to select the type of Power Management:
ACPI Suspend Type
S1
S3
S1&S3
Sets the power saving modes for the ACPI function
S1: Power on Suspend POS
S3: Suspend to RAM S3
Standby Mode
Suspend Mode
Disabled
1,5,10,15,30,45 Sec
1,5,10,15,30,45,60,
90,12 Min
This Submenu appears highlighted only when ―Legacy‖ is enabled in the
Menu ―Power Management‖. Standby mode conserves power by turning
off the display and the hard drive after a predetermined period of
inactivity (a time-out). When the computer exits standby mode, it returns
to the same operating state it was in before entering standby mode.
PME Event Function
Disabled
Enabled
Turns the Power Management Event function on/off
Soft-Off by
Power-Button Instant-Off
Delay 4 Sec
Configures the power button function.
Instant-Off: The power button functions as a normal power-on/-off
button.
Delay 4 Sec: The system is turned off if the power button is pressed for
more than four seconds.