Special features, Watchdog timer, 8special features – Kontron ETX-LX User Manual
Page 24: 1 watchdog timer
8 Special Features
Kontron User's Guide ETX®-LX
24
8
Special Features
8.1
Watchdog Timer
This feature is implemented in the AMD Geode CS5536 Companion Device. You can configure the
Watchdog Timer (WDT) from the BIOS setup to start after a set amount of time after power-on boot. The
application software should strobe the WDT to prevent its timeout. Upon timeout, the WDT resets and
restarts the system. This provides a way to recover from program crashes or lockups.
Configuration
Timer 1 has a range of 0 to 30 minutes and triggers NMI.
Timer 2 has a range of 0 to 30 minutes and triggers Reset.
The range of both timers by using JIDA32 is 0 to 65535 seconds.
Contact Kontron for information on programming and operating the WDT.
See also other documents in the category Kontron Hardware:
- CP3003-SA uEFI BIOS (72 pages)
- CP3003-SA (36 pages)
- CP3002 (38 pages)
- CP3002-RC uEFI (64 pages)
- CP-RIO3-05 (42 pages)
- CP3002-RC (30 pages)
- CP342 (52 pages)
- CP930 (46 pages)
- CP932 (52 pages)
- CP346 (72 pages)
- CP384 (66 pages)
- CP383 (74 pages)
- CP382 (58 pages)
- CP381 (60 pages)
- CP372 (64 pages)
- CP371 (60 pages)
- CP-RIO3-04S (38 pages)
- CP390 (36 pages)
- CPS3410 (9 pages)
- CPS3402 (9 pages)
- CPS3105 (9 pages)
- CPS3101 (9 pages)
- CPS3003-SA (19 pages)
- PB-SIO4 (34 pages)
- PB-SIO4A (34 pages)
- PB-DOUT8 (34 pages)
- VMOD-2 (82 pages)
- VSBC-32 (110 pages)
- VM42 (62 pages)
- Bootstrap Loader (24 pages)
- VMP1 with Netbootloader (120 pages)
- VMP1 (106 pages)
- NetBootLoader (86 pages)
- VMP2 (142 pages)
- VMP3 (154 pages)
- CP-RIO6-923 (32 pages)
- CP-RIO6-923-F (32 pages)
- CP-RIO6-001 (28 pages)
- CP-RIO6-001-HD-VGA (46 pages)
- CP-RIO6-M (20 pages)
- CP-RIO6-B (28 pages)
- CP6925 (42 pages)
- CP6002 uEFI BIOS (76 pages)
- CP6002 IPMI (40 pages)
- CP6002 (42 pages)