Kontron ETX-LX - Manual (Page 19)

6 Connector X3 Subsystems
Kontron User's Guide ETX®-LX 19
6 Connector X3 Subsystems
6.1 VGA Output
The ETX®-LX graphics subsystem is integrated in the AMD Geode™ LX 800 CPU/Northbridge.
Graphics Processor
Command buffer interface
Hardware accelerated rotation BLTs
Colour depth conversion
Palletized colour
Full 8x8 colour pattem buffer
Separate base addresses for all channels
Monochrome inversion
Display Controller
Retrieves graphics, video, and cursor data.
Serializes the streams.
Performs any necessary colour lookups and output for matting.
Interface to the Video Processor for driving the display device(s).
CRT resolution: 1920x1440x8bbp@60Hz, 1600x1200x16bbp@100Hz
Supports up to 1600*1200*32bbp@60Hz TTL and 1027*768*32bbp@60Hz LVDS
Video Processor
Supports video scaling, mixing and VOP
Hardware video up/down scalar
Graphics/video alpha blending and colour key muxing
Digital VOP (SD and HD) or TFT outputs
Legacy RGB mode
VOP supports SD and HD 480p, 480i, 720p, and 1080i
VESA 1.1, 2.0 and BT.601 24-bit (out only), BT.656 compliant
Integrated Analog CRT DAC, System Clock PLLs and Dot Clock PLL
Configuration
The graphics controller requires the following resources:
An IRQ
Several I/O addresses