Sata, 2 sata – Kontron ETX-LX User Manual
Page 25
8 Special Features
Kontron User's Guide ETX®-LX
25
8.2
SATA
The ETX®-LX conforms to ETX® 3.0 standard and provides an onboard SATA controller VIA VT6421A with
2 onboard standard SATA 1 connectors.
Note:
To enable RAID support select 'RAID'as SATA/2nd IDE operation mode in setup. If
'IDE' is selected a second OptionROM is loaded and no RAID support is given. The
new option 'IDE' is only available with BIOS MLX8R117 or newer.
To access the SATA Option ROM press "CTRL" + "Z" during POST. The option ROM is only available if SATA
RAID is enabled in the BIOS and a SATA Device is connected.
To create a Raid Array (Raid0, 1, JBOD) enter the Option ROM and follow the instructions
When using the SATA ports it's necessary to load a SATA Raid driver during installation process. Please
visit the ETX®-LX download section for more details and the latest driver revision.
- CP3003-SA uEFI BIOS (72 pages)
- CP3003-SA (36 pages)
- CP3002 (38 pages)
- CP3002-RC uEFI (64 pages)
- CP-RIO3-05 (42 pages)
- CP3002-RC (30 pages)
- CP342 (52 pages)
- CP930 (46 pages)
- CP932 (52 pages)
- CP346 (72 pages)
- CP384 (66 pages)
- CP383 (74 pages)
- CP382 (58 pages)
- CP381 (60 pages)
- CP372 (64 pages)
- CP371 (60 pages)
- CP-RIO3-04S (38 pages)
- CP390 (36 pages)
- CPS3410 (9 pages)
- CPS3402 (9 pages)
- CPS3105 (9 pages)
- CPS3101 (9 pages)
- CPS3003-SA (19 pages)
- PB-SIO4 (34 pages)
- PB-SIO4A (34 pages)
- PB-DOUT8 (34 pages)
- VMOD-2 (82 pages)
- VSBC-32 (110 pages)
- VM42 (62 pages)
- Bootstrap Loader (24 pages)
- VMP1 with Netbootloader (120 pages)
- VMP1 (106 pages)
- NetBootLoader (86 pages)
- VMP2 (142 pages)
- VMP3 (154 pages)
- CP-RIO6-923 (32 pages)
- CP-RIO6-923-F (32 pages)
- CP-RIO6-001 (28 pages)
- CP-RIO6-001-HD-VGA (46 pages)
- CP-RIO6-M (20 pages)
- CP-RIO6-B (28 pages)
- CP6925 (42 pages)
- CP6002 uEFI BIOS (76 pages)
- CP6002 IPMI (40 pages)
- CP6002 (42 pages)