11 mechanical specification, 1 module dimension, 2 height on top – Kontron SMARC-sAMX6i User Manual

Page 20: 3 height on bottom, 4 mechanical drawing, Mechanical specification, Module dimension, Height on top, Height on bottom, Mechanical drawing

SMARC-sAMX6i / Product Specification

3.11

Mechanical Specification

3.11.1 Module Dimension

» 50mm x 82mm

3.11.2 Height on Top

» Maximum 3.0mm (without printed circuit board)

» Height is depending on (optional) CPU cooler / heat spreader

3.11.3 Height on Bottom

» Maximum approx. 1.3mm (without printed circuit board)

3.11.4 Mechanical Drawing

All dimensions are shown in millimeters. Tolerances should be ± 0.25mm [±0.010”], unless otherwise noted.

CAD drawings will be available at