Kontron SMARC-sAMX6i - Manual (Page 12)

SMARC-sAMX6i / Product Specification
Graphics Core
The integrated Vivante core based supports:
3D Graphics Core Vivante GC2000
Shader Cores 4 with 21.6 GFLOP
2D Core Vivante GC320
2D Performance 633M pixels / sec raw performance
Vector Graphics Core Vivate GC355
Maximum Resolution (total) 4096x4096
Maximum Pixel Rate 266 MP/s
API (DirectX/OpenGL) OpenGL, OpenCL
Hardware accelerated Video TBD
Independent/Simultaneous Displays 2
HDCP support optional (HDCP 1.4)
LVDS
LVDS max Resolution: WXGA @60Hz
PWM Backlight Control: YES
Supported Panel Data: TBD
Display Interfaces
Parallel Display Bits 24
Parallel Display Max. Resolution WUXGA @60Hz (?)
HDMI
Max Resolution HDMI 1080p @ 60Hz
HDMI version HDMI 1.4a
HDCP support optional (HDCP 1.4)
Storage
onboard SSD 1x eMMC up to 64GB (MLC), 32GB
(SLC)
SD Card / eMMC support SDIO support via carrier board
Serial-ATA 1x SATA 3.0GB/s (only Quad/Dual)
SATA AHCI ?
SATA is not available on modules with i.MX6 solo processor.
Connectivity
USB 3x USB 2.0
PCI Express 1x PCIe x1 Gen2
Max PCI Express 1x PCIe standard (3x optional with
brige)
Ethernet 10/100/1000 Mbit
Ethernet controller processor integrated (with
Broadcom Phy)
Ethernet
The ethernet controller is in the processor integrated (with Broadcom Phy) and supports supports:
» Jumbo Frames TBD
» Time Sync Protocol Indicator TBD
» PXE (Preboot eXecution Environment)
12