Kontron COMe-cCT6 - Manual (Page 102)

COMe-cCT6 / BIOS Operation
Intel IGD Configuration
Feature Options Description
Prim IGFX Boot Display AUTO
LVDS
EFP1
Select the Integrated Grahics Video Device which will be
activated during POST. This has no effect if external
graphics devices are present.
Sec IGFX Boot Display Disabled
LVDS
EFP1
Select Secondary Integrated Grahics Display Device
Int. LVDS Panel Type AUTO
VGA 640Ч480 1Ч18
WVGA 800Ч480 1Ч18
SVGA 800Ч600 1Ч18
XGA 1024Ч768 1Ч18
XGA 1024Ч768 1Ч24
WXGA 1280Ч1024 1Ч18
WXGA 1280Ч1024 1Ч24
WXGA 1280Ч800 1Ч18
WXGA 1366Ч768 1Ч18
WXGA 1366Ч768 1Ч24
WXGA+ 1440Ч900 1Ч18
WXGA+ 1440Ч900 1Ч24
Select LCD panel used by Internal Graphics Device by
selecting the appropriate setup item
Panel Color Depth 18 Bit
24 Bit
For internal LVDS EDID detection, select the Panel Color
Depth
Backlight Control None/External
PWM
PWM Inverted
I2C
Backlight Control Setting
Backlight Value 128 Set LCD backlight brightness (0-255)
embedded DP Disabled
Enabled
Enables the embedded Display Port device
EFP1 Type DisplayPort Only
DP with HDMI/DVI
DP with DVI
HDMI/DVI
Integrated HDMI/DP Configuration. Please select the
Display Type the DDI is used for
EFP2 Type DisplayPort Only
DP with HDMI/DVI
DP with DVI
HDMI/DVI
Integrated HDMI/DP Configuration. Please select the
Display Type the DDI is used for
Mode Persistence Disabled
Enabled
Enables/Disables Mode Persistence
Fixed Graphics Memory 128MB
256MB
Configure Fixed Grahpics Memory Size
102