Kontron AM4010 - Manual (Page 16)

IPMI Firmware User Guide: AM4010
AdvancedTCA ®[ 10 ]
PICMG ® 3.0
Table
M
Get PICMG Properties 3-9 PICMG 00h M / Yes
Get Address Info 3-8 PICMG 01h
N/A
Get Shelf Address Info 3-13 PICMG 02h
N/A
Set Shelf Address Info 3-14 PICMG 03h
N/A
FRU Control 3-22 PICMG 04h
M / Yes [2]
Get FRU LED Properties 3-24 PICMG 05h
M / Yes
Get LED Color Capabilities 3-25 PICMG 06h
M / Yes
Set FRU LED State 3-26 PICMG 07h
M / Yes
Get FRU LED State 3-27 PICMG 08h
M / Yes
Set IPMB State 3-51 PICMG 09h
N/A
Set FRU Activation Policy 3-17 PICMG 0Ah
N/A
Get FRU Activation Policy 3-18 PICMG 0Bh
N/A
Set FRU Activation 3-16 PICMG 0Ch
N/A
Get Device Locator Record ID 3-29 PICMG 0Dh
M / Yes
Set Port State 3-41 PICMG 0Eh
N/A
Get Port State 3-42 PICMG 0Fh
N/A
Compute Power Properties 3-60 PICMG 10h
N/A
Set Power Level 3-62 PICMG 11h
N/A
Get Power Level 3-61 PICMG 12h
N/A
Renegotiate Power 3-66 PICMG 13h
N/A
Get Fan Speed Properties 3-63 PICMG 14h
N/A
Set Fan Level 3-65 PICMG 15h
N/A
Get Fan Level 3-64 PICMG 16h
N/A
Bused Resource 3-44 PICMG 17h
N/A
Get IPMB Link Info 3-49 PICMG 18h
N/A
AMC
AMC.0 Table
Set AMC Port State
Table 3-27
PICMG
19h O / Yes
Get AMC Port State
Table 3-28
PICMG
20h O / Yes
[1] Response byte 2: hours, byte 3: minutes after module start. Bytes 4..6: void
[2] Request byte 3: = only 04h (quiesced) implemented.
[3] Has oem extensions. Please refer to 6.2.2.1, Get Device ID command with OEM
extensions
Page 16 © 2007 Kontron AG ID: 36363, Rev. 1.1