Kontron AM4010 - Manual (Page 10)

IPMI Firmware User Guide: AM4010
6.2 Supported IPMI Commands
6.2.1 Standard commands
Part of the command list in IPMI specification 2.0
M = mandatory, O = optional
IPMI 2.0
Spec. section
NetFn CMD
Kontron
support
On MMC
IPM Device “Global” Commands M
Get Device ID 20.1 App 01h M / Yes [3]
Cold Reset 20.2 App 02h
O / Yes
Warm Reset 20.3 App 03h
O / No
Get Self Test Results 20.4 App 04h
O / Yes
Manufacturing Test On 20.5 App 05h
O / No
Set ACPI Power State 20.6 App 06h
O / No
Get ACPI Power State 20.7 App 07h
O / No
Get Device GUID 20.8 App 08h
O / No
Broadcast “Get Device ID”
20.9 App 01h
M / Yes
BMC Watchdog Timer
Commands
O
Reset Watchdog Timer 27.5 App 22h O / Yes
Set Watchdog Timer 27.6 App 24h
O / Yes
Get Watchdog Timer 27.7 App 25h
O / Yes
Page 10 © 2007 Kontron AG ID: 36363, Rev. 1.1