Kontron KTQM87-mITX User Manual
Ktqm87/mitx
This manual is related to the following products:
Table of contents
Document Outline
- 1 Introduction
- 2 Installation Procedure
- 3 System Specifications
- 4 Connector Locations
- 5 Connector Definition
- 6 IO-Area Connectors
- 7 Internal Connectors
- 7.1 Power Connector (ATX+12V-24p) (J20)
- 7.2 Fan Connectors (J28 and J29)
- 7.3 PS/2 Keyboard and Mouse connector (KBDMSE) (J26)
- 7.4 SATA (Serial ATA) Disk interface
- 7.5 USB Connectors (internal)
- 7.6 Speaker connector (J34)
- 7.7 SPDIF-Out (J33)
- 7.8 Front Panel Connector (FRONTPNL) (J12)
- 7.9 Serial COM1 – COM2 Ports (J19, J18)
- 7.10 LVDS Flat Panel Connector (J31)
- 7.11 Feature Connector (J27)
- 7.12 “Load Default BIOS Settings” Jumper (J5)
- 7.13 Always On jumper setting (J36)
- 7.14 SPI Connector (J32)
- 7.15 ccTalk Connector (J25)
- 7.16 LPC Connector (J30)
- 8 Slot Connectors (PCIe, miniPCIe)
- 9 On-board -& mating connector types
- 10 BIOS
- 10.1 Main
- 10.2 Advanced
- Silicon Information
- ACPI Configuration
- Processor Configuration
- Peripheral Configuration
- HDD Configuration
- Memory Configuration
- System Agent (SA) Configuration
- South Bridge Configuration
- Network Configuration
- LAN Configuration
- Hardware Health Configuration
- Kontron Configuration
- Display Configuration
- SMBIOS Event Log
- AMT Configuration
- ME Configuration
- Thermal Configuration
- ICC Configuration
- Intel ® Rapid Start Technology
- 10.3 Security
- 10.4 Boot
- 10.5 Misc
- 10.6 Exit