Kontron KTH81-mITX - Manual (Page 55)

KTD-N0882-H Page 55 Internal Connectors
KTQ87/KTH81 Users Guide
7.17 XDP_PCH (Debug Port for Chipset) (XDP_PCH)
The XDP_PCH (Intel Debug Port for Chipset) connector is not mounted and not supported. XDP_PCH
connector layout (pads) is located on the backside of PCB (below J35 connector on mITX version) and is
prepared for the Samtec BSH-030-01-F-D-A-TR.
Note Pull U/D Ioh/Iol Type Signal PIN Signal Type Ioh/Iol Pull U/D Note
PWR GND 1 2 GND PWR
NC 3 4 EC_WRST#
NC 5 6 2x4_PWR_DETECT
PWR GND 7 8 GND PWR
XDP_0 9 10 SATA0GP
XDP_1 11 12 SATA1GP
PWR GND 13 14 GND PWR
XDP_2 15 16 GP36
XDP_3 17 18 GP37
PWR GND 19 20 GND PWR
NC 21 22 NC
NC 23 24 NC
PWR GND 25 26 GND PWR
XDP_4 27 28 SATA4GP
XDP_5 29 30 GP49
PWR GND 31 32 GND PWR
XDP_6 33 34 GPIO18
XDP_7 35 36 SMI_N
PWR GND 37 38 GND PWR
PWRGD 39 40 JTAG_VREF
HOOK1 41 42 NC
PWR 3.3V 43 44 3.3V PWR
NC 45 46 RESET#
NC 47 48 HOOK7
PWR GND 49 50 GND PWR
SMB_DAT 51 52 JTAG_TDO
SMB_CLK 53 54 JTAG_RST
NC 55 56 JTAG_TDI
JTAG_TCK 57 58 JTAG_TMS
PWR GND 59 60 GND PWR