Kontron KTH81-mITX - Manual (Page 13)

KTD-N0882-H Page 13 System Specification
KTQ87/KTH81 Users Guide
Security Intel® Integrated TPM 1.2 support
Memory • DDR3 DIMM 240pin socket (2/4 sockets on mITX/Flex)
• Support single and dual ranks DDR3 1333/1600MT/s
(PC3-10600/PC3-12800)
• Support system memory from 1x 1GB up to 2x/4x 8GB on mITX/Flex.
Notes: Less than 4GB displayed in System Properties using 32bit OS
(Shared Video Memory/PCI resources is subtracted)
• ECC not supported (PGA processors do not support ECC)
Management Intel® Active Management Technology (Intel® AMT) 9.0 (KTQ87 only)
Audio Audio, 7.1 Channel High Definition Audio Codec using the VIA VT1708S codec
• Line-in
• Headphone stereo signals.
• Surround output: SIDE, LFE, CEN, BACK and FRONT
• Microphone: MIC1 and MIC2
• SPDIF-Out (electrical Interface only)
• On-board speaker (Electromagnetic Sound Generator like Hycom HY-05LF)
Video Intel ® i5 & i7 4 rd Generation Desktop processors support Intel ® HD Graphics 4600.
2 or 3x digital display ports via the Intel® Haswell CPU.
• 2x DP (DisplayPorts), comply with DisplayPort 1.2 specification. (H81 only)
• 3x DP (DisplayPorts), comply with DisplayPort 1.2 specification. (Q87 only)
• HDMI panel support via DP to HDMI Adapter Converter.
• DVI panel support via DP to DVI Adapter Converter.
• VGA panel support via DP to VGA Adapter Converter.
• LVDS panel JEIDA/VESA up to 2x24 bit (Flex only)
• Triple independent pipes (Q87 only)
• Triple independent or cloned displays are supported from OS.
• Any 3 or 2 displays via DP0, DP1, DP2 (Q87 only) or LVDS (Flex only) can be used.
(DP1 and LVDS cannot both be active at the same time).
Peripheral
interfaces
• 4x USB3.0 / USB2.0 on I/O area (Q87 only)
• 2x USB3.0 / USB2.0 plus 2x USB2.0 on I/O area (H81 only)
• 4x USB2.0 ports on internal pinrows (KTQM87/mITX, KTHM81/mITX, KTHM81/Flex)
• 6x USB2.0 ports on internal pinrows (KTQM87/Flex)
• 1x USB2.0 ports on internal mPCIe connector (mITX only)
• 1x USB2.0 ports on internal mSATA connector (mITX only)
• 2x Serial ports (RS232) on internal pinrows
• 1x SATA3.0, 2x SATA2.0 and 1x mSATA (SATA3.0, USB, LPC) (KTH81/mITX)
• 5x SATA3.0 and 1x mSATA (SATA3.0, USB, LPC) (KTQ87/mITX)
• 2x SATA3.0 and 2x SATA2.0 (KTH81/Flex)
• 6x SATA3.0 (KTQ87/Flex)
• RAID 0/1/5/10 support (Q87 only)