Kontron AT8402 Diagnostics Manual - Manual (Page 31)

AT8402 Diagnostics running on the Carrier
Page 2 - 23 AT8402 CLI Reference Manual
2.9 Example of diagnostics output
1 - Run quickturn diagnostics
2 - Run full diagnostics
3 - Run write diagnostics
4 - Display logs
q - restart system
Choice: 1
tcc: journal file is /opt/kontron/diag/AT8402/scenario.quickturn/
journal
PPC_RAMT : started
PPC_RAMT : PASS (PPC RAM Test)
PPC_ETHER : started
PPC_ETHER : PASS (PPC Ethernet Interface Test)
PPC_UART : started
PPC_UART : PASS (PPC Serial Line Test)
PPC_EBC : started
PPC_EBC : PASS (PPC EBC Settings Test)
PPC_I2C : started
PPC_I2C : PASS (PPC I2C Bus Test)
PPC_PCI : started
PPC_PCI : PASS (PPC PCI Bus Test)
PPC_FLASH_READ : started
PPC_FLASH_READ : PASS (PPC Flash Read Test)
PPC_SEEPROM : started
PPC_SEEPROM : PASS (PPC Seeprom Test)
CPLD_HOST_REG : started
CPLD_HOST_REG : FAIL (CPLD PPC Register Read Test)
CPLD_HOST_REGRW : started
CPLD_HOST_REGRW : PASS (CPLD PPC Register Read/Write Test)
CPLD_IPMC_REG : started
CPLD_IPMC_REG : FAIL (CPLD IPMC Register Read Test)
CPLD_IPMC_REGRW : started
CPLD_IPMC_REGRW : PASS (CPLD IPMC Register Read/Write Test)
IPMC_SENSORS : started
IPMC_SENSORS : FAIL (IPMC Sensor Test)
IPMC_SEEPROM_READ : started
IPMC_SEEPROM_READ : PASS (IPMC SEEPROM Read Test)
IPMC_WATCHDOG : started
IPMC_WATCHDOG : 10 of 60 seconds
IPMC_WATCHDOG : PASS (IPMC Watchdog Test)
IPMC_IPMB0 : started
IPMC_IPMB0 : PASS (IPMC IPMB0 Test)
IPMC_GA : started
IPMC_GA : PASS (IPMC Geographical Address Test)
IPMC_BIST : started
IPMC_BIST : PASS (IPMC Built-In-Self-Test Result)
TELCO_SWITCH : started
TELCO_SWITCH : FAIL (TELCO Clock Protection Switch Test)
BCM_PCI : started
BCM_PCI : PASS (BCM PCI Interface Test)
BCM_DMA : started
BCM_DMA : PASS (BCM DMA Transfer Test)
BCM_REGRW : started
BCM_REGRW : PASS (BCM Register Read/Write Test)
BCM_MEMORY : started
BCM_MEMORY : 10 of 360 seconds
BCM_MEMORY : 20 of 360 seconds
BCM_MEMORY : 30 of 360 seconds
BCM_MEMORY : 40 of 360 seconds