Kontron AT8402 Diagnostics Manual - Manual (Page 19)

AT8402 Diagnostics running on the Carrier
Page 2 - 11 AT8402 CLI Reference Manual
Failure impact
•
FUM-00040001 diagnostic code results from inconsistency of memory bank 1.
Impact is loss of update functionality for the IPMC.
• FUM-00040002 diagnostic code results from inconsistency of memory bank 2.
Impact is loss of update functionality for the IPMC.
• FUM-00040003 diagnostic code results from update failure when using memory
bank 1. Impact is loss of update functionality for the IPMC.
• FUM-00040004 diagnostic code results from update failure when using memory
bank 2. Impact is loss of update functionality for the IPMC.
2.6 IPMI Controller
2.6.1 IPMC_SENSORS
Sensor test.
Test group:
Diagnostics
Test case: ipmc
Test procedure: IPMC_SENSORS
Test host:
Carrier
Test IC: quickturn
Test mode: normal
Diagnostic code: IPMC-00050001 IPMC-000501nn IPMC-000502nn IPMC-
000503nn
Description
This test checks that all sensors shows adequate values. This includes voltage,
temperature, current and fuse sensors. It checks that all values read from sensors are
within given thresholds.
Sequence (regression)
•
read all sensors from the IPMC.
• check that all values are within their thresholds.
Execute
to get a list witH all sensors.
Possible failures are
•
the diagnostic code encodes the number of the failed sensor in the last two hexa-
decimal digits.
Failure impact
•
IPMC-00050001 diagnostic code results of failure to access the IPMC through the
KCS interface. The impact is loss of applications running on carrier host processor.
This impacts at least Ethernet functionality and command line interface.
• IPMC-000501nn diagnostic code results from a failure to read the sensor nn.
Impact is loss of the sensor, i.e. the sensor has failed.
• IPMC-000502nn diagnostic code results from the sensor nn reading values outside
its defined known-good values, either exceeding thresholds or indicating failure