Kontron CP6002 IPMI - Manual (Page 31)

CP6002 IPMI Firmware User Guide
ID: 1039-1613, Rev. 2.0 Page 31
11. Sensors Implemented on the CP6002
The sensor name (ID string) has a name prefix which is ‘NNN:’ in the lists below. When reading
the sensor name after module insertion this prefix becomes automatically adapted to the role
(BMC or SMC) and the physical position (slot number) of the module in a rack. If the module's
Management Controller is set up as a BMC the prefix will be ‘BMC:’ independent of the slot
where it resides. If the module's Management Controller is set up as a SMC the prefix will be
‘Sxx:’ where xx is the slot number (e.g. 09).
The sensor number is the number which identifies the sensor e.g. when using the IPMI com-
mand ‘Get Sensor Reading’. Please note that ‘ipmitool’ accepts sensor numbers in decimal
(e.g. ‘10’) or hexadecimal (e.g. ‘0xa’) notation.
The IPMI tool ‘ipmitool’ displays for the command ‘ipmitool sdr list’ the contents of the sensor
data record repository (SDRR) of the whole rack if the SDRR has been generated. The gener-
ation of the SDRR has always to be redone after adding or removing a board from the rack.
Refer to chapter 2.3, IPMI Setup for the Rack for further information.
11.1 Sensor List
For OEM (Kontron) specific sensor types and codes in the following table please refer to chap-
ter 11.3.
Table 9:
Sensor List
SENSOR Number
/
ID string
SENSOR TYPE (CODE) /
EVENT/READING TYPE
(CODE)
Ass. Mask /
Deass. Mask /
Reading Mask
DESCRIPTION
LED I1on
error /
Reading
Mask
0h /
NNN:Hot Swap ATCA/CTCA Hot Swap (F0h) /
Sensor-specific (6Fh) 001Fh / 0000h /
001Fh Hot swap sensor N
1h /
NNN:Temp CPU Temperature (01h) /
Threshold (01h) 1A81h / 7A81h /
3939h CPU die temperature Y
/ 0F3Ch
2h /
NNN:Temp PCH Temperature (01h) /
Threshold (01h) 0A80h / 7A80h /
3838h Temp Chipset Y
/ 0F3Ch
3h /
NNN:Temp Graphic Temperature (01h) /
Threshold (01h) 1A81h / 7A81h /
3939h Temp Graphic Y
/ 0F3Ch
4h /
NNN:Temp Board 1 Temperature (01h) /
Threshold (01h) 7A95h / 7A95h /
3F3Fh Temp Board 1 Y
/ 0F3Ch
5h /
NNN:Pwr Good Power supply (08h) /
OEM (73h) 0000h / 0000h /
400Fh Status of all power lines N
6h /
NNN:Pwr Good Evt Power supply (08h) /
OEM (73h) 0180h / 7180h /
3838h Power fail events for all
power lines Y
/ 402Fh
7h /
NNN:Board 3.3V Voltage (02h) /
Threshold ( 01h) 2204h / 2204h /
1212h Board 3.3V supply Y
/ 0F3Ch
8h /
NNN:Board 5VIPMI Voltage (02h) /
Threshold ( 01h) 2204h / 2204h /
1212h Management Power (MP)
5V Y
/ 0F3Ch
9h /
NNN:Board 5.0V Voltage (02h) /
Threshold (01h) 2204h / 2204h /
1212h Board 5V supply Y
/ 0F3Ch
Ah /
NNN:Board 12V Voltage (02h) /
Threshold (01h) 2204h / 2204h /
1212h Board 12V supply Y
/ 0F3Ch