Axle lock (tru–lok®) — rubicon models, Axle lock (tru–lok®) — rubicon, Models – Jeep 2015 Wrangler - Owner Manual User Manual

Page 448

AXLE LOCK (TRU–LOK®) — RUBICON MODELS

The AXLE LOCK switch is located on the instrument

panel (to the left of the steering column).

This feature will only activate when the following con-

ditions are met:

• Key in ignition, vehicle in 4L (Low) range.
• Vehicle speed should be 10 mph (16 km/h) or less.
To activate the system, press the bottom of the AXLE

LOCK switch once to lock the rear axle only (the “Rear

Axle Lock Indicator Light” will illuminate), press the

bottom of the switch again to lock the front axle (the

“Front Axle Lock Indicator Light” will illuminate). When

the rear axle is locked, pressing the switch again will lock

or unlock the front axle.
NOTE:

The indicator lights will flash until the axles are

fully locked or unlocked.
To unlock the axles, press the top of the AXLE LOCK

switch.

Axle Lock Switch

446 STARTING AND OPERATING