Front panel(s) installation, Front panel(s) installation with rear hard top, Removed – Jeep 2015 Wrangler - Owner Manual User Manual

Page 216

Front Panel(s) Installation

NOTE:

Set the panels on the windshield frame so that

there is no overhang. Also, make sure that the panels are

sitting flush with the body.
1. Install the right panel first, then the left panel.
2. Reinstall the panel(s) using the same steps for removal

in reverse order.

Front Panel(s) Installation With Rear Hard Top
Removed

1. Turn the left and right panels over and move the

spacer block (located on the rear of the panel) upward

90 degrees.

NOTE:

The front panel(s) must be positioned properly

to ensure sealing. Set the panels on the windshield frame

so that there is no overhang. Also, make sure that the

panels are sitting flush with the body.
2. Install the right panel first, then the left panel.

214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE