beautypg.com

Jeep 2015 Wrangler - Owner Manual User Manual

Page 192

background image

The power inverter is designed with built-in overload

protection. If the power rating of 150 Watts is exceeded,

the power inverter will automatically shut down. Once

the electrical device has been removed from the outlet the

inverter should automatically reset. If the power rating

exceeds approximately 170 Watts, the power inverter

may have to be reset manually. To reset the inverter

manually push the power inverter button OFF and ON.

To avoid overloading the circuit, check the power ratings

on electrical devices prior to using the inverter.

The power inverter switch is located

on the instrument panel below the

climate controls. To turn on the power

outlet, push the switch once. The indi-

cator light will illuminate. Push the

switch a second time to turn the power

inverter outlet off.

NOTE:

When the power inverter switch is pushed, there

will be a delay of approximately one second before the

inverter indicator light turns ON.

Power Inverter

190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE