Ets_isoperationcomplete() – ETS-Lindgren HI-6153 Electric Field Probe User Manual
Page 134
134
|
ETSProbe DLL User Guide
ETS_I
S
O
PERATION
C
OMPLETE
()
int ETS_IsOperationComplete(const int probeHandle);
Purpose:
Used with commands that start with the word
Initiate
to determine when an operation is finished.
Return Value:
Returns an integer status code. The numeric value
0
indicates successful completion.
See Status Codes on page 121 for error code
description.
Input Parameters:
int probeHandle
As returned from
ETS_CreateProbe function.
Output Parameters:
None.
This manual is related to the following products: