ETS-Lindgren HI-6153 Electric Field Probe - Manual (Page 106)

106 | Operating Protocols
Probe
Command
Description Probe Response
D3 Read probe data :Dx.xxxyy.yyzzz.zB
 xxxx, yyyy, zzzz=
4-digit axis values with
floating decimal point
 B=battery flag, N or F
D5 Read probe data :Dx.xxxyy.yyzzz.zcccc.B
 xxxx, yyyy, zzzz=
4-digit axis values with
floating decimal point
 cccc=composite field value
with floating decimal point
 B=battery flag, N or F
I Identification command :I60XXB
 XX=specific probe model
 sr=10-character software
revision
 sn=8-character serial
number
 cd=8-character calibration
date
 B=battery flag, N or F
The Identification command, I, may also be used as the first command
sent. The command will turn on the laser. Once communication
between the probe and the Laser Data Interface (LDI) is established,
the return string will be sent. Subsequent
I commands immediately
send the return string.
TC Read temperature in
Centigrade :Txxxx.