ETS-Lindgren 2165 Turntable - Manual (Page 19)

Electrical Installation | 19
5.0 Electrical Installation
Before assembling, installing, or connecting any components,
follow the safety information in the ETS-Lindgren
Product Information Bulletin included with your shipment.
Electrical installation must be performed by a qualified
electrician, and in accordance with local and national electrical
standards.
Make sure the power is off and secured before proceeding.
Determine the mains voltage to be applied to the motor base unit. The branch
circuit supplying power to the motor base should be protected from excess
current according to local electrical codes. Confirm that the conductor size is
adequate for the motor load with respect to the distance from the mains source.
Improperly-sized conductors will lead to a high voltage drop in the power
conductors and cause reduced starting torque. This condition could lead to
premature motor failure.
Keep all body parts away from the drive gears and drive belt
when the turntable is energized. Do not operate the turntable
with the protective guards removed.