EFCO E-Shade - Manual (Page 23)

SERIES 5600 CENTER TONGUE SUNSHADE CLIP INSTALLATION MANUAL 6/2012
EFCO CORPORATION PART #YWSS Page 23 of 41
SECTION VIII: SUNSHADE “LADDER” ATTACHMENT
CONTINUE WITH SUNSHADE
“LADDER” ATTACHMENTS DOWN THE
LENGTH OF THE SUNSHADE RUN.
EFCO DESIGNS THE SUNSHADE
“LADDER” LENGTHS TO REQUIRE
MINIMAL SHIMS. HOWEVER, POLY-
SHIMS WILL NEED TO BE INSERTED
AS REQUIRED BETWEEN THE CLIP
& THE OUTRIGGER ARM.
ONLY FINGER TIGHTEN THE ATTACHMENT BOLTS
UNTIL THE FULL RUN IS IN PLACE. ALIGNMENT OF
THE SUNSHADE “LADDER” SECTION MUST BE
COMPLETED ONE SECTION AT A TIME BEFORE THE
BOLTS ARE TIGHTENED TO A NOMINAL 80 IN * LB.