Mode menu, Mode menu -13 – Dynojet Tuning Link User Manual
Page 25

S O F T W A R E F E A T U R E S
Menu Choices
Version 2
Tuning Link User Guide
2-13
M
ODE
M
ENU
For detailed information on the mode menu choices, refer to “Basic Software
Features” on page 2-16.
Select Mode
!
Bike Break-in/Warm Up
Warm Up mode allows you to bring the dyno, bike, and any other equipment
(air/fuel sensor, etc.) to the proper operating temperature. For detailed
information on warm up mode, refer to “Bike Break-in/Warm Up” on page 2-16.
Select Mode
!
Steady State Fuel Mapping
Steady State Fuel Mapping, or Steady State Tuning, mode allows you to tune
specific portions of the map using the eddy current brake to hold the bike steady
at a particular RPM while you control the throttle position (TP). For detailed
information on steady state tuning, refer to “Steady State Fuel Mapping” on page
2-16.
Select Mode
!
Roll-On Fuel Mapping
Roll-On Fuel Mapping, or Roll-On Tuning, allows you to quickly tune the major
portions of the map using similar techniques to the roll-on runs that you are
accustomed to using in WinPEP to measure power and torque. For detailed
information on roll-on tuning, refer to “Roll-On Fuel Mapping” on page 2-17.