Dynojet Tuning Link - Manual (Page 22)

Tuning Link User Guide
C H A P T E R 2
Menu Choices
2-10
T OOLS M ENU
Select Tools ! Configuration
The Configuration window allows you to control the status, throttle position, and
map settings for all tuning modes. Refer to “Configuration Window” on page 2-4
for more information.
Select Tools ! PID Control Parameters
PID Control Parameters are used to control the responsiveness of the eddy
current brake. Use the values specified during your power commander training
course or in the help files.
Figure 2-7: PID Control Parameters
Select Tools ! Throttle Position Settings
The Set Throttle Position window allows you to initialize the throttle position
table in the power commander.
1 With the throttle completely closed, click Set TP Closed.
You will see a number change in the box to the left of the button.
2 With the throttle completely open, click Set TP Open.
Note: You may need to set the eddy current brake to hold the engine at a safe
RPM if you are doing this sequence with the bike running.
Figure 2-8: Set Throttle Position