Dynojet 250i: Control Panel Interface Upgrade (S/N 202xxxx) - Manual (Page 27)

25
54. If you purchased the optional Wheel Clamp then press the left hand clamp button and verify that the
Wheel Clamp closes. Release the button. Press the right hand clamp button first then press the left
hand clamp button and hold both buttons to open the clamp. Refer to the user’s manual for more
details of the operation.
55. If you purchased the optional Motorized Carriage then press the carriage forward and back buttons
and verify carriage movement.
56. Turn off the dyno main breaker and unplug the dyno main power cord. Install the Control Panel
Interface drip cover with three 8-32 x ¼ -inch screws.
Wheel Clamp
Control Buttons
Carriage
Control
Buttons