Dave Smith Instruments POLY EVOLVER KEYBOARD - Manual (Page 45)

Display MIDI mode
Off This Part will not respond to MIDI
Notes This Part only responds to MIDI notes
Cntrls This Part only responds to MIDI controller
messages
On All This Part responds to both MIDI notes and MIDI
controller messages
MIDI Ch: 1…16, All – Selects the MIDI channel to use for this Part. If All is selected, it
responds to any MIDI channel. If MIDI Mode is set to Off, this parameter is ignored.
Sequencer: Enable, Disable– Enables or disables the Program’s sequencer for this
Part. Only Parts with the Sequencer enabled will respond to hitting the S
TART switch
or MIDI Start commands (when MIDI clocks are enabled in the Global setting). If this
Part uses a gated sequence Trigger mode (see below), you should leave the
Sequencer Off – the voices in this Part will play the gated sequences automatically.
Tempo: 30…250 – Sets the tempo of the Part – ignored if the Sequencer is Off.
Clock Div: see table – Sets the clock divider for this Part, also ignored if Sequencer
is Off.
Display Tempo Timing Division
Half BPM/2 Half note
Quartr BPM Quarter note
Eighth BPM x 2 Eighth note
8 half BPM x 2 Eighth note, half swing timing
8swing BPM x 2 Eighth note, full swing timing
8 trip BPM x 3 Eighth note triplets
16th BPM x 4 Sixteenth note
16half BPM x 4 Sixteenth note, half swing timing
16swng BPM x 4 Sixteenth note, full swing timing
16trip BPM x 6 Sixteenth note triplets
32nd BPM x 8 Thirty-second note
32trip BPM x 12 Thirty-second note triplets
64trip BPM x 24 Sixty-fourth note triplets
Trigger: see table – Selects the source of triggers/gates for the envelope generators
for this Part. Note that the Sequencer and/or keyboard must be enabled to match the
Trigger selected.
In the Poly (different from the Evolver) some of the Trigger modes will automatically
turn the Sequencer on. This allows gated-sequence Programs to be played without
having to manually hit the S
TART /S TOP switch. The Trigger modes that do this are
marked in the table as AUTO.
45