Dave Smith Instruments TETRA - Manual (Page 58)

52
391 0 - 3 Parameter Receive†:
0 All
1 NRPN only
2 CC only
3 Off
394 0 - 1 MIDI Controller Send/Receive Off/On
395 0 - 1 MIDI Sysex Send/Receive Off/On
400 0 - 3 Audio Out:
0 Stereo
1 Mono
2 Quad
3 Q LR34
403 0 - 13 Balance Tweak*: 0 = -7, 7 = 0, and 13 = 7
404 0 - 2 Pot Mode: Relative, Passthru, Jump
406 0 - 1 MIDI Out Select*:
0 MIDI Out
1 MIDI Thru
407 0 - 1 Multi Mode Off/On
411 0 - 1 Select layer A (0) or B (1)
412 0 - 1 Select Program mode (0) or Combo mode (1)
413 0 - 4 Select voice
0 All voices
1 Voice 1
2 Voice 2
3 Voice 3
4 Voice 4
*Received, but not sent.
†Sent, but ignored when received.
Program Parameter Data
The following table lists Tetra’s voice parameters. The parameter number in the
program and edit buffer dumps are different than the NRPN numbers as seen;
this was to maintain NRPN compatibility with the Prophet ’08 as much as
possible.
Parm A B Range Description
0 0 200 0 – 120 Oscillator 1 Frequency, 0 – 120 in
semitones (10 octave range)
1 1 201 0 – 100 Oscillator 1 Fine Tune; 0 = -50 cents, 50
= 0 (centered), 100 = + 50 cents
2 2 202 0-103 Oscillator 1 Shape
0 Oscillator
Off
1 Sawtooth
2 Triangle
3 Sawtooth/triangle
mix
4 – 103 Pulse Wave, Pulse width 0 – 99
3 3 203 0 - 127 Oscillator 1 Glide