Dave Smith Instruments TETRA - Manual (Page 11)

5
Front Panel Controls
Select — Use S
ELECT
to change and scroll through programs and combos.
When A
SSIGN
P
ARAMS
is on, S
ELECT
changes the value of the current
parameter. Also used to select parameters in Global mode.
Mode (Program/Combo/Global) — Tetra has four modes of operation:
program, combo, global, and edit. Press the button to toggle between Program
and Combo Mode.
When in Program Mode, the display shows the name, number, and bank of the
current program. Editing any of the parameters puts Tetra into Edit Mode and
displays the last parameter edited and its stored and edited values. To return to
Program Mode, simply press the mode switch. See Program Parameters starting
on page 17 for more information.
In Combo Mode, the display shows the name and number of the current combo.
Editing any of the parameters puts Tetra into Edit Mode and displays the voice
(V1, V2, V3, or V4) being edited, the last parameter edited and its edited value.
To return to Combo Mode, simply press the mode switch. See Combos on page
33 for more information.
Global mode is accessed by briefly holding down the mode button. The Global
menu is displayed. Use S
ELECT
to scroll the Global menu and the increment and
decrement (+ and -) buttons to change the settings. To return to Program or
Combo Mode, simply press
the mode button. See Global Parameters on page 13
for more information.