Dave Smith Instruments TETRA - Manual (Page 57)

51
Received NRPN Messages
Status Second Third Description
1011 nnnn 0110 0011 0vvvvvvv NRPN parameter number MSB CC
1011 nnnn 0110 0010 0vvvvvvv NRPN parameter number LSB CC
1011 nnnn 0000 0110 0vvvvvvv NRPN parameter value MSB CC
1011 nnnn 0010 0110 0vvvvvvv NRPN parameter value LSB CC
1011 nnnn 0110 0000 0xxxxxxx NRPN parameter value Increment
1011 nnnn 0110 0001 0xxxxxxx NRPN parameter value Decrement
1011 nnnn 0010 0101 0111111 RPN parameter number MSB CC - Reset NRPN
parameter number (when both MSB and LSB
received)
1011 nnnn 0010 0100 0111111 RPN parameter number LSB CC - Reset NRPN
parameter number (when both MSB and LSB
received)
Global Parameter Data
The following table shows the Global data sent and received on global
parameter dumps, and the corresponding NRPN numbers.
NRPN Range Description
384 0 - 24 Master Transpose: 0= -12 semitones (1 octave), 12=0 (no
transpose), and 24= +12 semitones.
385 0 - 100 Master Fine Tune: 0 = -50 cents, 50 = 0 (centered), 100 = + 50
cents
386 0 - 16 MIDI Channel: if = 0, data received on all MIDI channels.
Otherwise = channel number 1 - 16.
387 0 - 7 Poly Chain*
0 Off
1 Out 1
2 Out 4
3 Out 8
4 Out 12
5 In End
6 InOut4
7 InOut8
388 0 - 4 MIDI Clock Source*
0 Use Internal clock, don’t send MIDI clock
1 Voice 1 is the master clock in Combo mode
2 Use Internal clock, send MIDI clock
3 Use MIDI clock In
4 Use MIDI clock In, and retransmit MIDI clock out
389 0 - 1 Local Control* Off/On
390 0 - 2 Parameter Send*:
0 NRPN
1 CC
2 Off