Dave Smith Instruments TETRA - Manual (Page 22)

16
Reset Globals — Tetra does not have a full hardware reset, but select this
parameter and press W
RITE
to reset the global parameters to their factory
defaults.
MIDI SysEx Dump: see table — Allows dumping of programs and combos in
SysEx format via MIDI.
Display Data to be dumped to SysEx
Current Program Dump current program
Current Prog Bank Dump all 128 programs in current bank
All Progrm Banks Dump all programs in all 4 banks
Current Combo Dump current combo
Combo Bank Dump all combos
All Progs Combos Dump all program banks and combos
Current Prog P08 Dump current program in Prophet ’08 format
CurrentProgMopho Dump current program in Mopho format
Program Bank P08 Dump current bank in Prophet ’08 format
Prog Bank Mopho Dump current bank in Mopho format
Press the W
RITE
switch to start transmission. This feature is handy for saving
Programs on a computer in SysEx format, or for sending them to another Tetra
via a direct MIDI connection. The dumps include Program and Bank numbers,
so when received, the programs will be stored in the same location.
Programs can also be exported in Mopho and Prophet ’08 formats.
Features/parameters not available on those instruments are stripped out. For
example, Mopho does not support layers, so only layer A is exported. The
Prophet ’08 does not have feedback or sub-octave generators.
Program Copy Utility — Enables layer A or layer B of a program to be copied
to layer A or B of the same or a different program. The top line displays the
current bank and program. Use increment (+) or decrement (-) to choose the
layer to be copied. Then use S
ELECT
to select the destination bank, program, and
layer and increment/decrement to change the values.