Coral Industries Steam Bypass - 2SR1-P (If Purchased from a Plumbing Wholesaler) - Manual (Page 8)

2SR1-P 7/05
Rollers are to be installed on the same side of door
panels as horizontal vinyl seals and towel bars.
Mount rollers (F) to top channel of doors at the midpoint
of slots using 8-32 x 3/8" truss head screws (O).
Rollers may be positioned up or down in slots to adjust
for out of plumb situations.
Lift inside door panel into header with towel bar facing
inside of bath. Seat rollers on roller track while guiding
bottom of door into sill guide.
Repeat for outside door, hanging panel with towel bar
facing outside of bath.
Seal unit by caulking along outside of enclosure where
metal and bath meet, especially where sill and tub
meet. If desired, caulk inside of enclosure where jambs
meet walls.
O
8-32 x 3/8"
Truss Head
Screw
Roller
Inside
Door
Panel
Inside
Door
Panel
Header
Header
Outside
Door
Panel
Sill
OUTSIDE
OF
BATH
OUTSIDE
OF BATH
Door
Panel
C
C
13
Caulking
12 Hanging Door Panels
11 Rollers
(F)
A
F
Vertical Vinyl
Seal
Horizontal
Vinyl Seal
Guide
G
Jamb
B
A
Sill
Caulk
where
metal and
bath meet.
If desired,
caulk inside of
enclosure
where jambs
meet bath.
Horizontal
Vinyl Seal
Horizontal
Vinyl Seal
OUTSIDE
OF BATH
Caulk
Caulk
Caulk