Coral Industries Steam Bypass - 2SR1-P (If Purchased from a Plumbing Wholesaler) - Manual (Page 2)

2SR1-P 7/05
Before starting installation of your new enclosure, carefully read all instructions
and lay out parts to become familiar with their identity.
USE OF ANCHORS
Anchors are furnished with every enclosure. However, the use of anchors is not recommended when attaching your enclosure
to a fiberglass unit or wall surrounds with board reinforced mounting areas. Mounting holes in this case should be drilled with
an 1/8" drill bit.
Mounting of this unit on tile requires the use of anchors. Special care must be taken not to crack the tile. Before drilling holes
in the tile, lightly chip glazed surface of tile at the desired locations. Drill holes using a 3/16" masonry drill bit. Insert anchors
into the holes making certain that ring on large end of anchor meets the surface of the tile.
CLEANING
SEALING
The use of a caulking compound can assure a water-tight seal when applied along outside edge of the enclosure where metal
and bath meet. If desired, caulk inside of enclosure where jambs meet walls.
C leaning and care of your enclosure is important to its lasting beauty. We suggest using a nonabrasive liquid cleaner.
Never use scouring powder or pads.
Do not try to cut the mirrors or glass used in this enclosure.
Tempered glass and mirrors will disintegrate if cut.
A SILL A925 1
B JAMB A901 / A531 2
C HEADER A902 1
D TOWEL BAR A721 2
J VINYL TRACK GUIDE V436 1
E TOWEL BAR BRACKET KIT HBBB
TOWEL BAR BRACKET HBCL 4
TOWEL BAR BRACKET SLEEVE HASL 4
PULL/STOP HA12 2
8A X 1 1/4 FLAT HEAD SCREW H810 2
8A X 1 PAN HEAD SCREW H479 2
PULL/STOP LABEL H904 2
F ROLLER H342 4
O 8-32 X 3/8 TRUSS HEAD SCREW H430 4
G DOOR GUIDE HA21 1
H BUMPER HB01 4
I
8A X 1 1/4 PAN HEAD SCREW H480 6
8A X 2 1/4 PAN HEAD SCREW H903 6
M ANCHOR H002 6
N 8A X 3/8 PAN HEAD SELF DRILLING SCREW H901 3
PARTS LIST
DESCRIPTION KEY PART
FRAME PACKAGE
TOOLS
NEEDED
1/8" Drill Bit
3/16" Drill Bit
(3/16" Masonry Bit for
Ceramic Tile)
Pencil
Measuring Tape
Hacksaw
Phillips Screw Driver
Silicone Caulk
File
Drill
Level
Masking Tape
HARDWARE BAG
QTY