Copernicus IS2 User Manual

Page 13

IS2 - Version A - Released 02 August 2013 - Copernicus Educational Products Inc.

Install Telescoping Rods

Slide Telescoping Rods into the left

and right side of the Square
Accessory Rod.

Insert Knobs into place on the

Accessory Rod. Loosening these will
allow for the rods to slide in or out,
while tightening them will hold the
rods at the desired location.

Ensure that the correct hook is on

the left and right side. Hooks should
face towards the back of the unit.

Telescoping Rod x 2

Knob x 2

You will need:

(Not to Scale)

Install Front Channels

Front Channel x 2
1 Left, 1 Right

You will need:

(Not to Scale)

x 4

Actual Size:

Identify the right and left Front

Channels

Align the Front Channels with the

bottom holes on the Middle and
Front Frame

It may help to loosely install first,

and tighten once both bolts are
through the part.

Right Side

Top

Bottom