Lighting controls (for l4 models only) – Code 3 V-Con Siren User Manual
Page 10

10
Lighting Controls (For L4 Models Only)
WARNING LIGHTS 3-LEVEL PROGRESSIVE SLIDE SWITCH:
POSITION 1 - Supplies power to Lighting Level 1. Illuminates Green LED. Activates LightAlert if supplied
POSITON 2 - Supplies power to Lighting Levels 1 & 2. Illuminates Green and Yellow LED's. Activates LightAlert and SirenLock op-
tions if supplied.
Position 3- Supplies power to Lighting Levels 1,2, & 3. Illuminates Green, Yellow, AND Red LED's. Activates LightAlert and SirenLock
if supplied.
Auxiliary Switches:
AUXILIARY SWITCH "A" - Supplies power to the load connected to terminal SW A.
AUXILIARY SWITCH "B" - Supplies power to the load connected to terminal SW B.
AUXILIARY SWITCH "C" - Operates circuit connected to terminals SWC NO, SWC NC, SWC COM.
Functions as a latching or momentary output, depending on the type of switch installed.
AUXILIARY SWITCH "D" - Supplies power to the load connected to terminal SW D.
SirenLock - The SirenLock option, when not defeated by means of the internal switches, allows siren tones (Wail, Yelp, and Hi-Lo) to
be produced only when the Warning Light Switch is in the Lighting Level 2 (Green and Yellow LED's) or Lighting Level 3 (Green, Yel-
low, and Red LED's) position. Air Horn, Radio Rebroadcast, and Public Address are unaffected by this option.