Code 3 Matrix - Manual (Page 5)

5
Wire Gauge Selection
General Harnessing Instructions
Once all the products in the Matrix System have been chosen and located in the vehicle, harnessing
supplied with the lights can be routed through the vehicle. It is best to route from the various lights back to
the Matrix System CC. This allows the harnessing to be cut to fit. Puncture holes in the break-thru plugs
with the wires from the lighting of the vehicle. Strip back the protective shield around the wires to expose
the individual wires inside. Once inside the Matrix System CC, quick connects (supplied) can be added to
each wire. Once all quick connects are properly crimped to the wires, attach either directly to the CC or to
the junctions in the CC box as needed.