Code 3 Matrix - Manual (Page 14)

14
6. Put four sheet metal screws (#6) through the chosen lens, through the heat sink, and into the black
adapter plate.
7. Repeat step 3 through 5 for STT and/or Reverse 3x5s as required.
Grommets are available for mounting all 3x5 lighting
to cutouts in the body of the vehicle. Replace sheet
metal screws with four #8 machine screws supplied
with grommets.
Bezels are also available for mounting directly
without having to cut a large hole for the grommet.
Single, double, and triple stack enclosures are
available for new installations if preferred.