Code 3 Par 36 for Dodge Charger User Manual
Installation & operation manual, Important
1
INSTALLATION &
OPERATION
MANUAL
Read all instructions and warnings before installing and using.
This manual must be delivered to the end user of this equipment.
IMPORTANT:
INSTALLER:
2011 DODGE CHARGER PAR 36 LED LIGHT
2011 DODGE CHARGER
PAR 36 LED LIGHT
Table of Contents:
Page No: Description:
1.
Preparation for installation
2. (a)
Installation on vehicle supplied without fog lights from factory
2. (b)
Installation on vehicle supplied with fog lights from factory
3.
Wiring connections and Installation notes
4.
Warranty Information
Code 3 Par 36 LED light heads are sold separately:
Please call Code 3 customer service for LED configura-
tions and pricing available.
(Installation on STD PPV supplied without fog
lights from the factory. )
Preparation for Installation:
1. Access to the rear of the front facia is required in order to complete hardware installation
and make wiring connections. Two methods of gaining access are available:
A.
Remove Front facia from vehicle for total
front end access.
B.
Remove lower facia splash guard from under
the engine compartment for access to rear of
facia while mounted on vehicle.