Catler JE 4011 - Manual (Page 16)

14
DISASSEMBLING YOUR JE 4011 JUICE EXTRACTOR
JUICE EXTRACTOR
Step 1
Ensure the JE 4011 Juice Extractor is turned
off by pressing the ‘On/Off ’ switch on the
control panel to ‘Off ’. Then switch the
appliance off at the power outlet and unplug
the cord.
Step 2
Remove the pulp container by tilting the
base away from the motor base, then un-
latch it from under the juicer cover and the
container support extending from under the
motor base.
Step 3
Use the grip handle located on the safety
locking arm to lift the locking arm from the
juicer cover and lower down out of position.
Step 4
Lift the juicer cover off the JE 4011 Juice
Extractor.
Step 5
Remove the fi lter bowl surround with the
juice disc still in place.
Step 6
To remove the juice disc from the fi lter bowl
surround, insert fi ngers under the grooves
market ‘LIFT BASKET’ and lift the juice disc
up. For easy cleaning, it is recommended to
remove the juice disc over the sink.
DISASSEMBLING YOUR JE 4011 JUICE EXTRACTOR
WARNING: THE JUICE DISC CONTAINS SMALL SHARP BLADES TO CUT AND
PROCESS FRUITS AND VEGETABLES. AVOID TOUCHING BLADES WHEN
HANDLING THE FILTER BASKET.