Catler JE 4011 User Manual

Page 10

ASSEMBLING YOUR JE 4011 JUICE EXTRACTOR

Step 5
Raise the safety locking arm up and locate
it into the two grooves on either side of the
juicer cover. The safety locking arm should
now be in a vertical position and locked into
place on top of the juicer cover.

Step 6
Slide the food pusher down the feed chute
by aligning the groove of the food pusher,
with the small protrusion on the inside top
of the feed chute. Continue to slide the food
pusher down into the feed chute.

Step 7
Place the pulp container into position by
tilting the base of the pulp container away
from the motor base and slide the top of the
pulp container over the bottom of the juice
cover. Tilt the base of the pulp container back
into the motor base ensuring it is supported
by the container support extending from
under the motor base.

To minimise cleaning, line the pulp container
with a plastic freezer bag to collect the pulp.
Pulp can then be used in other dishes, or as
compost for the garden or discarded.

NOTE

Step 8
Place the juice jug provided under the spout
on the right-hand side of the JE 4011 Juice
Extractor. The juice jug lid can be used to
avoid any splatter.
Alternatively you can fi t the custom-designed
juice nozzle over the juice spout and place
a glass underneath. The juice nozzle will
prevent splatter, ensuring mess free juicing.