Catler JE 4011 - Manual (Page 14)

12
OPERATING YOUR JE 4011 JUICE EXTRACTOR
The LCD display will illuminate continuously
for 3 minutes before going into a sleep mode,
where it will switch off automatically to
conserve power. The screen will come back on
after activating the ‘On/Off ’ switch, the speed
control dial, or the safety locking arm.
When the safety locking arm is not locked into
place on top of the juicer cover, the LCD display
will illuminate and fl ash with an “L”, indicating
that the safety locking arm should be locked
into place.
When the safety locking arm is locked into
place on top of the juicer cover, the LCD display
will illuminate and display the selected speed
setting. The speed can be changed by adjusting
the variable speed control dial. For a quick
juicing speed reference, use the speed guide
displayed on the LCD screen, the speed selector
table located on the pulp container, or refer to
the speed selector table.
Hard fruits and vegetables will put excess strain
onto the motor if a low speed is selected. Please
refer to the speed selector table to determine
the correct speed for the fruits and vegetables
being juiced
NOTE
SPEED SELECTOR TABLE
FRUIT / VEGETABLES
SUGGESTED
SPEED
Apples 5
Apricots (stone removed) 2
Beetroot (cleaned, trimmed) 5
Blueberries 1
Broccoli 4
Brussel Sprouts (trimmed) 5
Cabbage 4
Carrots (cleaned) 5
Caulifl ower 4
Celery 5
Cucumber (peeled) 2
Cucumber - soft skinned 4
Fennel 5
Grapes (seedless) 1
Kiwi fruit (peeled) 2
Mangoes (peeled, stone
removed)
2
Melons (peeled) 1
Nectarines (stone removed) 2
Oranges (peeled) 3
Peaches (stone removed 2
Pears - hard (stalks removed) 5
Pears - soft (stalks removed) 2
Pineapple (peeled) 5
Plums (stone removed) 2
Raspberries 1
Tomatoes 1
Watermelon 1
Use the speed selector table located on the pulp
container for a quick and convenient juicing
reference.
NOTE