Salter Brecknell B220 - Manual (Page 9)

9 B220 Counting Scale User’s Manual
Using the Scale
Zeroing the Scale
Short key press = 1
beep
Long key press = 2
beeps
Using the Clear
Key
Clearing a
Numeric Entry
Using Tares
This section shows you the steps required to perform
weighing and counting operations. The first few sections
are general information on zeroing the scale, clearing
values, and using tares. After that are specific instruc-
tions on performing sampling and doing counting
operations.
Be sure the scale is always zeroed before doing a
weighing or counting function.
To zero the scale, make
sure the scale is empty and
short press the Zero key. . .
0 weight and the center-
of-zero mark is displayed.
Be sure there are no active tares, piece weights or PLU
(piece weight lookup) values.
To clear all these values,
long press the Clear key.
If you are keying in a value via the numeric keypad and
make an error, you can erase the last digit entered or
the entire entry.
To erase the last digit
entered, short press the
Clear key. . .
The last digit is deleted
from the display.
To erase the entire number,
long press the Clear key. . .
The entire number is
deleted from the display.
To perform a tare, place the
container or object to be
tared on the scale platform
and short press the
Tare key. . .
The Net annunciator lights
and the display shows
zero weight.