Salter Brecknell B220 - Manual (Page 13)

13 B220 Counting Scale User’s Manual
Using the High
Limit Alarm
Setting the high limit
View the current high
limit
Clearing the high limit
Using Part Look
Up (PLU) Keys
Short key press = 1
beep
Long key press = 2
beeps
Below are instructions for setting, viewing, and clearing
a high limit alarm value. The high limit alarm will sound
when the count displayed on the scale exceeds the
number you set. You can set a high limit before or after
sampling.
To set the high limit, key
in the number via the
keypad and short press
the High Limit key. . .
The high limit number
becomes active. When
you count items, if the
count exceeds the high
limit, a beeping alarm will
sound.
To view the current high
limit value, short press the
High Limit key. . .
The value will be dis-
played briefly in the
display.
To clear a high limit, short
press the High Limit key
and short press the Clear
key while the high limit is
displayed. . .
The high limit is deleted
and the weight is dis-
played.
Use Part Look Up (PLU) keys to store and recall piece
weight and/or tare weight for an item. You can store up
to 35 PLUs.
Use the PLU key to set up or recall any of the 35 PLUs.
There are 7 PLU
X keys called hot keys. Use these to
quickly setup or recall PLUs for the first seven of the 35
PLUs. You should assign the most commonly counted
items in your inventory to these 7 keys.
Below are instructions for creating, recalling and
clearing PLUs.