Salter Brecknell B220 User Manual

Page 14

B220 Counting Scale User’s Manual

Method 1 Using

PLU key

Remember that a PLU
can store a piece
weight and/or a tare
weight.

Individual PLUs can be
locked so changes
cannot be made. See
the Service Manual for
instructions.

Creating a PLU

Method 2 Using the

PLU

hot key

Short key press = 1
beep
Long key press = 2
beeps

You can create a PLU using three methods; by using
the PLU key, by using the PLU

hot key, or using the

auto-store PLU. All three methods are described below.

Using the PLU key, you can assign a PLU to one of 35
available memory slots. These are numbered 1-35.
Follow these steps to create and store a PLU:

1. Create a piece weight

using any of the
techniques covered in
the section Using
Piece Weights.

2. Create a tare (if so

desired) by one of the
methods covered in the
section Using Tares.

3. Key in a number for the

PLU (1-35) and long
press the PLU key. If
you want the PLU to be
available through one
of the 7 hot keys on the
front panel you must
choose a number
between 1 and 7
(inclusive). . .

The PLU is created and
stored.

Using the PLU

hot keys, you can assign a PLU to one

of first seven available memory slots. These are
numbered 1-7. Follow these steps to create and store a
PLU using the hot keys:

1. Create a piece weight

using any of the
techniques covered in
the section Using Piece
Weights.

2. Create a tare (if so

desired) by one of the
methods covered in the
section Using Tares.

3. Long press the PLU

hot key where you want
to store the PLU. . .

The PLU is created and
stored.